Experimental Investigation of Magnet Grouping Technique in Reduction of Cogging Torque and Total Harmonic Distortions in the Axial Flux PM Generator for Direct Drive Wind Turbine
Electric Power Components and Systems, cilt.51, sa.18, ss.2181-2192, 2023 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 51 Sayı: 18
- Basım Tarihi: 2023
- Doi Numarası: 10.1080/15325008.2023.2227177
- Dergi Adı: Electric Power Components and Systems
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, Business Source Elite, Business Source Premier, Communication Abstracts, Compendex, Environment Index, INSPEC, Metadex, DIALNET, Civil Engineering Abstracts
- Sayfa Sayıları: ss.2181-2192
- Anahtar Kelimeler: wind turbine, cogging torque, permanent magnet, axial flux generator, total harmonic distortion
- Kırklareli Üniversitesi Adresli: Evet
Özet
Generators that have been used in direct-drive wind turbines could be produced with a permanent magnet between the power ranges of 1 kW to 1 MW. The cogging torque is the most significant problem of these generators. In this study, the pole grouping method is suggested to reduce the cogging torque of an axial flux permanent magnet (AFPM) synchronous generator with open slotted. The suggested method includes magnetic analyzes and experimental results of the 14-pole open slotted AFPM generator rotor poles that grouped as 7-7, 4-3-4-3, 3-2-2-3-2-2 and named A, B, C, respectively. Besides obtaining the cogging torque (Tc) data, the most considerable part of the study is to get total harmonic distortion (THDV) and output power (Pout) data in which show the electrical performance of the generator for different grouping angles. The optimum ranges for an AFPM generator were determined as 80% reduction for Tc, 15% reduction for Pout, and below 3% for THDV. The optimum grouping angles for A, B, and C were obtained by experimental studies as 32°, 32°, and 30°, respectively. Experimental results and the magnetic analysis have been shown that optimum values are obtained when the ratio of the pole angle to the grouping angle is (Formula presented.).